After a long period of use, the shower head will block […]
After a long period of use, the shower head will block up. This is natural. This does not mean that the shower head is broken. Don’t worry, you don’t need to buy a new one at all. This is due to the scale that has been generated after long-term water discharge. , You only need to disassemble and clean the shower head.
Dip in vinegar
If your shower head has been blocked for a long time, and a lot of holes have been blocked. Then using a needle to pierce one by one is obviously not obvious. In this case, it is recommended that you use acidification to remove dust to solve the problem of clogged showers. You need to prepare some white vinegar. Pour the vinegar into a basin so that the shower head can be submerged. After soaking in vinegar for about ten minutes, the scale in the shower head can be removed.
If some of the small holes in the shower in your house are blocked, let the water out first and see that the holes are blocked. Then you have to open the shower head of the shower and see that there are many small holes on the shower head like a shower head. This is where the water comes out. Then we first prepare a needle, and then use the needle to pierce the impurities in the perforation with the small hole that we just saw without water, until there are no impurities in the hole. This method is the most straightforward, but be careful to puncture the shower hole.
If the metal of the shower head is rusted and the blockage is very serious, use WD-40 anti-rust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. The rust layer can be separated from the metal layer. Make the rusty part and the metal contact surface, and leave a protective film. Let the shower never rust to death. If your home shower is not made of stainless steel, you may use this method.