What is the installation height of the shower head to choose the right shower head


1. The installation height of the shower head is genera […]

1. The installation height of the shower head is generally about 2.1-2.2 meters, and the distance between the shower head and the human head is about 40 cm. It is inconvenient to use if it is too close, and it is easy to touch the shower. If it is too far away, the water temperature will decrease and hot water will be wasted. The height difference of family members is relatively large, so you can buy a shower head with lifting function and adjust it according to height. Generally, the water inlet of the exposed shower is about 0.9-1.1 meters from the ground. The concealed shower has the same height as the exposed shower except that the water pipe is embedded in the wall.


2. The styles of the shower heads are roughly the same, with some minor changes. The most important thing is the material, generally metal material, plastic material, the faucet has alloy, copper, copper is better. The water pipe is generally made of plastic, but also stainless steel and copper. The faucet (mixing valve) is the key point, choose a better material, and switch smoothly.

The other is the sprinkler. The function of the sprinkler is to disperse the water. Choose stainless steel, copper is better, and plastic is easy to deform and block. Some showers are actually glued to the showers. Under the effect of long-term soaking in water, the glue will fall off. Sprinklers are used for a long time, and the water output is easy to become small. Most of them are caused by clogged pipes and clogged shower nozzles, mainly caused by scale and some impurities.


3. Pay attention to the spare parts of the shower head when choosing, carefully observe the material and workmanship, don't be confused by the surface coating, see the chrome coating and think it is metal. The shower sprays water evenly and has a large area. In addition, the sprinkler has reserved water inlets with a distance of about 15-20 cm. It is best to be flush with the tile wall, which is easier to install. Later, it can be adjusted through the elbow, and the adjustment direction is up, down, left, and right.

Views: 131