What are the installation skills of shower hoses

Update:11-06-2021
Summary:

Shower hose installation tips 1: Choose the right showe […]

Shower hose installation tips 1: Choose the right shower hose

Various metal hoses, braided hoses, and PVC reinforced hoses for shower hoses. Different materials have different writing, and there is no absolute answer to which one is better. When buying in a hardware store, you can compare several materials. The key surface has flatness, uniform clearance, smooth hand feeling, natural expansion, firm structure, and strong resistance to destruction. In addition, the size of the shower hose should be consistent with that of the shower. The general size is 14mm, 16mm, 17mm and 18mm in outer diameter. You can take the old hose and buy a new one for comparison.

Shower hose installation technique 2: How to change the shower hose

First, replace the old hose and unscrew the flower hose from the shower and both ends of the faucet by hand. Then replace it with a new shower hose, screw one end to the shower and the other end to the faucet, and just screw it on. However, some effort is required. Men usually do it for you. Girls will be there to help cheer and wipe sweat.

Sprinkler hose installation technique 3: Attention to the use of shower hose

The use temperature of the shower hose should not exceed 70°C. High temperature and ultraviolet light will greatly accelerate the aging of the shower and shorten the service life of the shower. Therefore, the shower should be installed as far away as possible from the heater and other electrical heat sources. The shower head cannot be installed directly under the Yuba, the distance should be above 60cm. The shower hose should be kept in a natural stretched state, and do not coil it around the faucet when not in use. At the same time, be careful not to form a dead angle at the joint between the hose and the faucet, so as not to break or damage the shower hose.

https://www.chinashattaf.com/

0
Views: 19