How to maintain the bathroom shower

Update:12-08-2020
Summary:

The shower head is used every day when we take a bath. […]

The shower head is used every day when we take a bath. How to maintain it to prolong its service life with such frequent use? Let's find out together!

 

How to maintain the shower

1. Removal of scale: After the shower has been used for a period of time, some scale may accumulate, resulting in poor water flow or turbulence. Scale cleaning is an inevitable job of the shower. According to the different functions of the shower, it is mainly divided into the following categories:

Manual cleaning

You need to remove the net cover or other parts that absorb the scale at the shower head, clean it with a brush, and then install it back. Some brands of showers are equipped with special shower head opening tools when they are sold, which is convenient for consumers to use.

Hand wipe cleaning

The water outlet of this type of shower is designed with rubber granules. The rubber material feels soft and comfortable, and it is not easy to scale, and it is easy to clean. Just rub the rubber granules with your fingers, and the scale can be easily crushed and ejected. This cleaning method makes good use of the characteristics of the material and is now a popular cleaning method on the market.

 

Automatic cleaning

Due to the special structure of a certain type of shower, the scale will be automatically cleaned out during use. For example, some shower heads have cleaning needles inside. When the water outlet mode is switched, the cleaning needles will automatically pop out to bring out the scale.

What needs to be reminded here is that even if your shower has an automatic cleaning function, it is best to open the shower head after a long time of use for a comprehensive and thorough manual cleaning to give your shower the most meticulous maintenance. Every six months or less, remove the shower head and place it in a small pot. Use edible white vinegar to water the surface and inside of the shower head and soak for 4-6 hours, then gently wipe the spout on the surface of the shower head with a cotton rag : After reinstalling the connector, let the water flow for a while, and wait for the white vinegar and scale to flow out with the water to eliminate or reduce the influence of scale on the shower, and can play a certain sterilization effect.

Precautions

a: Please pay attention to the safety of yourself and the product when disassembling the shower head:

b: The filter gasket cannot be used with a mesh that is too large or too fine. If it is too large, it may not be able to filter impurities. If it is too fine, it may affect the water flow. The size of the filter should be 40-60 mesh. (Small science popularization: The so-called mesh refers to the particle size or thickness of the material. The general definition refers to the number of meshes in an area of ​​1 inch * 1 inch, that is, the number of meshes of the screen through which the material can pass. The hole is defined as the number of meshes: for example, 200 meshes means that the material can pass through a sieve with 200 meshes in 1 inch * 1 inch.)

c: Do not use strong acid when removing scale to avoid corrosion on the shower surface.

d: Do not forcibly disassemble the shower for maintenance. Improper disassembly will damage the appearance and internal structure of the product.

e: The ambient temperature of the showerhead should not exceed 70 degrees Celsius. High temperature and ultraviolet light will greatly accelerate the aging of the showerhead and shorten the service life of the showerhead. Therefore, the showerhead should be installed as far away as possible from the heater and other electrical heat sources. The shower cannot be installed directly below the Yuba, and the distance should be above 60cm.

 

How to buy shower head

Shower stream

The appearance of many showers is very similar. The first thing to pay attention to when choosing is the effect of water flow from the nozzle. Under normal circumstances, high-quality showers can ensure the effect of spray holes, and the flow of water from each spray hole is very balanced, so that people can enjoy the comfort of sanitary ware.

Different outlet methods

At present, there are many ways for the internal water outlet of the shower, such as general style, turbo style, gun beam style, massage style and so on. Turbine-style water flow is strong, which has a slight stimulating effect on the skin; strong-beam-style water discharges quickly, and the water flow is strong, instantly generating a fog-like effect in the bathroom; massage-style water flow is strong, the water flow from the shower can be on the body due to different strengths Multiple places produce massage effect.

Surface coating effect

The effect of the coating on the surface of the shower head is directly related to the quality of the sanitary ware and the service life of normal use. The better effect of normal coating is that it can be kept at a high temperature of over 120 degrees Celsius for an hour without any undesirable phenomena. The daily cleaning will not affect the discoloration of the surface coating. When checking, you can carefully observe whether the appearance is smooth and shiny, and whether the surface coating is uniform.

Spool

The quality of the valve core directly affects its normal use time limit, and the ceramic valve core is now a relatively common material. When you are choosing, turn the switch gently. If you feel that it feels good and smooth, it can basically ensure a smooth and good performance.

0
Views: 126