How to determine the installation height of the shower head


The shower head can be regarded as one of the indispens […]

The shower head can be regarded as one of the indispensable supplies in each of our family bathrooms. We generally pay attention to many factors such as the material, appearance, and nozzle of the shower head when purchasing the shower head. But you may have overlooked a problem, that is, the installation height of the shower. In fact, the installation height of the shower is related to the comfort level of our shower. So we must pay attention to the height of the shower when choosing a shower. Today, let's take a look at what is the appropriate height of the shower head?

The installation height of shower head can be divided into two categories: concealed type and exposed type shower head.

1. Installation height of concealed shower head

The concealed shower only reveals a shower head, and the shower column that comes out of the water is buried in the wall, so you can't see it. And the center of the water outlet used to connect the shower head from outside the wall should be about 2.1 meters from the ground. The distance between the shower control switch and the faucet is preferably about 1.1 meters. It is also the most common shower installation height.

2.The installation height of the exposed lifting rod shower

This type of flower is the flower most people would choose. Showers with exposed lifting rods generally use the water surface as the reference surface to judge the height. The best place is where the shower head and the horizontal line are 2 meters high. Still should make specific judgments based on the user's actual height standards during actual installation. The height of the shower head is generally suitable for the user to touch his finger when he raises his arm. But the installation position should not be too low, so as not to hurt the fingers when the arm swings in the shower.

Another thing to note is that the water pipes buried in the wall of the exposed shower switch are hot water on the left and cold water on the right. Make no mistake. The center distance between the left and right exits is 150 mm. During construction, the exit on the wall must be flush with the tile surface. The internal pipe must not be inclined and must be perpendicular to the wall. This can ensure that the installed shower head can be at right angles to the wall, beautiful and tidy, and installed in place.

Views: 41